| User need | Engineering metric | How the design meets it |
|---|---|---|
| Keeps good time | Rate -20 / +40 s/day across positions; isochronism within 10 s/day from full wind to 24 h | 21,600 bph balance with an index regulator for adjustment; the Fe-Ni self-compensating hairspring keeps the rate stable with temperature |
| Runs over a weekend off the wrist | Power reserve >= 40 h | Barrel turns once per 8 h (80/10 into the centre pinion); 5.1 turns of mainspring give about 41 h |
| Winds itself | Full wind after about 8 h of normal wear | 3 g off-centre rotor on a ball bearing; pawl lever rectifies both rotation directions into ratchet motion |
| Can be dived with | 200 m water resistance (ISO 6425 style test); readable in the dark | Screw-down crown and caseback with radial gaskets; compressed crystal gasket; lume on hands and indices; unidirectional bezel |
| Survives knocks | Runs after a 1 m drop onto hardwood (ISO 1413 style) | Spring-mounted shock settings on both balance pivots |
| Survives a phone or bag clasp | Rate change < 30 s/day after 4,800 A/m (ISO 764) | Fe-Ni hairspring meets the minimum; a silicon hairspring would make this a non-issue (see opportunities) |
| ID | Part | Qty | Subassembly | Material | Process | Mass | Cost | Necessary? |
|---|---|---|---|---|---|---|---|---|
| C01 | Case middle with lugs | 1 | Case | 316L stainless | cnc milling | 48 g | $9.00 | yes |
| C02 | Unidirectional bezel with anodized insert | 1 | Case | 316L stainless | cnc turning | 7.0 g | $2.20 | yes |
| C03 | Bezel click spring (120 clicks) | 1 | Case | spring steel | stamping | 0.10 g | $0.01 | yes |
| C04 | Sapphire crystal, AR coated inside | 1 | Case | sapphire | purchased | 2.5 g | $4.50 | yes |
| C05 | Crystal gasket (compressed) | 1 | Case | rubber | purchased | 0.10 g | $0.05 | yes |
| C06 | Screw-down caseback | 1 | Case | 316L stainless | cnc turning | 14 g | $3.00 | yes |
| C07 | Caseback gasket | 1 | Case | rubber | purchased | 0.10 g | $0.03 | yes |
| C08 | Screw-down crown with tube and 2 gaskets | 1 | Case | 316L stainless | purchased | 1.5 g | $1.60 | yes |
| C09 | Movement holder ring | 1 | Case | PA66 | injection molding | 0.80 g | $0.04 | no |
| C10 | Casing clamps with screws | 2 | Case | steel | purchased | 0.10 g | $0.06 | no |
| D01 | Dial, printed, applied lumed indices | 1 | Dial and hands | brass | purchased | 1.2 g | $2.00 | yes |
| D03 | Hands (hour, minute, seconds) with lume | 3 | Dial and hands | brass | purchased | 0.18 g | $1.05 | yes |
| D04 | Date disc, 31 days | 1 | Dial and hands | brass | stamping | 0.30 g | $0.30 | yes |
| F02 | Dial-side screws | 3 | Keyless and motion works | steel | purchased | 0.03 g | $0.03 | no |
| M20 | Winding stem | 1 | Keyless and motion works | alloy steel | screw machining | 0.10 g | $0.33 | yes |
| M21 | Sliding pinion (clutch) and winding pinion | 2 | Keyless and motion works | steel | purchased | 0.10 g | $0.24 | yes |
| M22 | Setting lever, yoke and yoke spring | 3 | Keyless and motion works | steel | stamping | 0.15 g | $0.24 | yes |
| M23 | Crown wheel and ratchet wheel | 2 | Keyless and motion works | steel | stamping | 0.30 g | $0.24 | yes |
| M24 | Click and click spring | 2 | Keyless and motion works | steel | stamping | 0.04 g | $0.10 | yes |
| M25 | Cannon pinion, minute wheel, hour wheel | 3 | Keyless and motion works | brass | purchased | 0.15 g | $0.30 | yes |
| M26 | Date driving wheel, date jumper and spring | 3 | Keyless and motion works | steel | stamping | 0.15 g | $0.30 | yes |
| M07 | Barrel drum (80 T) and cover | 2 | Movement energy | brass | purchased | 0.50 g | $0.50 | yes |
| M08 | Mainspring with slipping bridle | 1 | Movement energy | Co-Ni spring alloy | purchased | 0.40 g | $0.60 | yes |
| M09 | Barrel arbor | 1 | Movement energy | alloy steel | screw machining | 0.08 g | $0.42 | yes |
| M28 | Oscillating weight (rotor) on ball bearing | 1 | Movement energy | brass | purchased | 3.0 g | $1.20 | yes |
| M29 | Pawl lever with eccentric and transmission wheels | 3 | Movement energy | steel | stamping | 0.15 g | $0.45 | yes |
| F01 | Movement screws (bridges, cock, rotor, plates) | 16 | Movement frame | steel | purchased | 0.16 g | $0.16 | no |
| M01 | Main plate (pillar plate) | 1 | Movement frame | brass | cnc milling | 3.5 g | $3.00 | yes |
| M02 | Barrel bridge | 1 | Movement frame | brass | cnc milling | 1.2 g | $1.20 | yes |
| M03 | Train wheel bridge | 1 | Movement frame | brass | cnc milling | 0.80 g | $1.00 | yes |
| M04 | Balance cock | 1 | Movement frame | brass | cnc milling | 0.40 g | $0.80 | yes |
| M05 | Pallet bridge | 1 | Movement frame | brass | cnc milling | 0.20 g | $0.50 | yes |
| M06 | Automatic device bridge | 1 | Movement frame | brass | cnc milling | 1.0 g | $1.00 | yes |
| M19 | Jewels pressed into plate and bridges | 18 | Movement frame | synthetic ruby | purchased | 0.05 g | $0.36 | yes |
| M27 | Date ring holding plate | 1 | Movement frame | brass | stamping | 0.40 g | $0.03 | yes |
| M14 | Pallet fork with 2 ruby pallet stones | 1 | Movement regulator | steel | purchased | 0.02 g | $0.40 | yes |
| M15 | Balance wheel with staff, roller and impulse jewel | 1 | Movement regulator | brass | purchased | 0.30 g | $0.80 | yes |
| M16 | Hairspring with collet and stud | 1 | Movement regulator | Fe-Ni alloy | purchased | 0.01 g | $1.20 | yes |
| M17 | Regulator index | 1 | Movement regulator | steel | stamping | 0.05 g | $0.10 | yes |
| M18 | Shock settings (spring, cap and hole jewels) | 2 | Movement regulator | spring steel | purchased | 0.02 g | $0.50 | yes |
| P01 | Lubrication points (oils and greases) | 12 | Movement regulator | oil | purchased | 0.000 g | $0.05 | no |
| P02 | Regulation on a timegrapher, demagnetise | 1 | Movement regulator | purchased | 0.000 g | $0.00 | no | |
| M10 | Centre wheel (64 T) and pinion (10) | 1 | Movement train | brass | purchased | 0.20 g | $0.35 | yes |
| M11 | Third wheel (75 T) and pinion (8) | 1 | Movement train | brass | purchased | 0.08 g | $0.25 | yes |
| M12 | Fourth (seconds) wheel (84 T) and pinion (10) | 1 | Movement train | brass | purchased | 0.07 g | $0.25 | yes |
| M13 | Escape wheel (15 T) and pinion (7) | 1 | Movement train | steel | purchased | 0.02 g | $0.30 | yes |
| S01 | FKM rubber strap halves | 2 | Strap | rubber | purchased | 22 g | $4.00 | yes |
| S02 | Spring bars | 2 | Strap | 316L stainless | purchased | 0.80 g | $0.16 | no |
| S03 | Buckle with pin | 1 | Strap | 316L stainless | purchased | 4.0 g | $0.80 | yes |
E = 3 × Nmin / T = 3 × 75 / 864 s = 26.1 %. Joints: press x27, screw x23, align x22, drop in x15, hold down x12, adhesive x12, snap x1. 23 fasteners.
| ID | Part | Qty | Time |
|---|---|---|---|
| F01 | Movement screws (bridges, cock, rotor, plates) | 16 | 144.0 s |
| P02 | Regulation on a timegrapher, demagnetise | 1 | 90.0 s |
| P01 | Lubrication points (oils and greases) | 12 | 72.0 s |
| F02 | Dial-side screws | 3 | 27.0 s |
| C10 | Casing clamps with screws | 2 | 18.0 s |
| S02 | Spring bars | 2 | 17.0 s |
| C09 | Movement holder ring | 1 | 5.2 s |
Boothroyd test: a part must stay separate only if it moves relative to the others, needs a different material, or must come apart for assembly or service.
Parts $46.00 + assembly labour $1.44 = $47.44, 16 % of the $295.00 retail price. 16 of 49 line items make 80 % of parts cost.
Estimates from mass, indicative material prices, machine rates and amortised tooling (or given quotes). Use for ranking and comparison, not for quoting.
| Wear / failure part | Held by | Parts removed first | Score |
|---|---|---|---|
| Sapphire crystal, AR coated inside | press | 1 | 6.1 |
| Caseback gasket | align | 1 | 7.9 |
| Screw-down crown with tube and 2 gaskets | screw | 0 | 8.2 |
| Mainspring with slipping bridle | hold down | 5 | 7.0 |
| Oscillating weight (rotor) on ball bearing | align | 1 | 7.9 |
| Balance wheel with staff, roller and impulse jewel | align | 1 | 6.5 |
| FKM rubber strap halves | align | 0 | 10.0 |
| AP | Item | Mode | Effect | Cause | S/O/D | RPN | Action |
|---|---|---|---|---|---|---|---|
| High | Caseback and crown gaskets | Lose compression with age and sunscreen | Water ingress, rust on the movement | Rubber compression set after 3-5 years | 8/4/6 | 192 | FKM gaskets, pressure test at each service, print 'service every 5 years' in the manual |
| Medium | Lubricants | Oil dries or migrates | Amplitude drops, rate drifts, wear on pivots | Oil ageing over 5-7 years; epilame missing on a jewel | 5/6/5 | 150 | Epilame on escape and pallet jewels; dry-lubricated silicon escapement in a premium version |
| Medium | Hairspring | Magnetised (coils stick) | Gains minutes per day | Laptop speaker, phone case or bag clasp magnets | 6/5/4 | 120 | Silicon or Nb-Zr hairspring; soft-iron inner cage as a lower-cost option |
| Medium | Balance staff pivots | Break on impact | Watch stops | Drop onto a hard floor beyond the shock-setting travel | 7/3/2 | 42 | Check shock-spring preload; larger end-shake limits |
| Low | Date mechanism | Jams when quick-set between 21:00 and 03:00 | Bent date jumper or broken date-driving tooth | Quickset fights the driving finger while it engages | 4/5/7 | 140 | Slip clutch on the date driving wheel, or an instantaneous date jump |
| Low | Mainspring | Fatigue fracture | Watch stops, no power | Cyclic winding over about 10 years | 7/2/3 | 42 | Replace at service; spring is a stock part |
| Product | Regulator | Accuracy | Power reserve | Parts (movement) | Service interval | Typical price |
|---|---|---|---|---|---|---|
| This watch (mass-market automatic) | Balance + hairspring, 3 Hz | -20/+40 s/day | ~41 h | ~130 | 5-7 years | $250-400 |
| Typical quartz diver | Quartz 32,768 Hz | +/-15 s/month | Battery 2-3 years | ~40-60 | Battery + gaskets | $80-200 |
| Typical certified Swiss automatic | Balance + hairspring, 4 Hz | -4/+6 s/day | ~38-80 h | ~140-200 | 5-10 years | $1,000+ |
| Opportunity | Change | Impact | Effort | Saving / unit (negative = adds cost) |
|---|---|---|---|---|
| Size the movement to the case | Bore the case middle to the movement diameter and delete the holder ring | One part and one assembly step fewer; the movement seats on metal, not plastic | low | $0.05 |
| Fold the pallet bridge into the train bridge | One bridge carries the train and the pallet pivots | One part and two screws fewer, about 15 s off assembly; the pallet still comes out with the train bridge for service | med | $0.55 |
| Quick-release spring bars | Spring bars with a lever so the wearer changes straps without a tool | The commonest owner repair becomes tool-free; strap sales rise | low | −$0.15 |
| Silicon hairspring | Replace the Fe-Ni hairspring with oxidised silicon | Removes the magnetism failure mode and improves temperature stability; needs a new collet and stud | high | −$2.50 |
| Date mechanism that cannot jam | Slip clutch on the date driving wheel | Removes the 21:00-03:00 'do not set' warning from the manual | med | −$0.10 |
Cost-down moves together: $0.60 per unit (1.3 % of should-cost; savings can overlap). Upgrades that add cost: $2.75 per unit.
A textbook mass-market automatic: the gear train, pawl-lever winding and slipping bridle get the most function from the fewest parts, and the brass main plate does the precision work so that the wheels can be cheap. The cost sits in the case, the crystal and the plate rather than in the gears, and assembly is dominated by tiny-part handling, sixteen movement screws, lubrication and regulation. Reliability is set by the four gaskets, the oil and the hairspring's magnetism, not by the steel. A silicon hairspring and a jam-proof date are the upgrades that change the owner experience; the holder ring and the separate pallet bridge are the cost-downs.